Amatangoora Point
Verify this point
Verification history (0)
Amatangoora Point is a point located in Australia, catalogued in the GeoNames topographic database dataset. The point has been assigned the stable identifier #228187 on SurveyingPedia and sits at an approximate elevation of 3.0 metres. Its coordinates in WGS84 are -16.737490°, 123.132400°, corresponding to 16° 44′ 14.96″ S, 123° 7′ 56.64″ E in the traditional degrees-minutes-seconds format. This page is a self-updating reference — all data is aggregated from public open sources and cross-checked periodically against the originating agency.
Professional surveyors, engineers, and topographers use points like Amatangoora Point to anchor total-station traverses, verify GNSS/RTK solutions, calibrate levelling instruments, and validate survey deliverables against known coordinates. The record on this page is refreshed daily via automated pipelines that monitor the public sources for any updates, corrections, or status changes.
Coordinate formats
| WGS84 (decimal) | -16.737490, 123.132400 |
| WGS84 (DMS) | 16° 44′ 14.96″ S, 123° 7′ 56.64″ E |
| UTM zone (approx.) | Zone 51S (approx.) |
| Elevation | 3.00 m |
| Precise conversion | Open in coordinate converter → |
Geodetic context in Australia
The national geodetic reference in Australia is maintained by Geoscience Australia. The active datum is GDA2020. Coordinates shown on this page are expressed in WGS84 (ETRF/ITRF-compatible) which is directly usable in most modern GNSS receivers. For cadastral work in Australia you may need to convert to the local datum using the Coordinate Hub.
Browse the full list of indexed control points in Australia from the country page.
Nearby benchmarks
The closest 6 indexed control points within roughly 50 km of this location:
Frequently asked questions
What is Amatangoora Point?
Amatangoora Point is a point located in Australia, catalogued in the GeoNames topographic database network. It has the public identifier #228187 and sits at an elevation of 3.0 metres. The point is used for geodetic reference, topographic surveys, and related measurement workflows.
Where are the exact coordinates of Amatangoora Point?
The position of Amatangoora Point in WGS84 is -16.737490°, 123.132400° (decimal), or 16° 44′ 14.96″ S, 123° 7′ 56.64″ E in degrees-minutes-seconds. For planar surveys in Australia this falls approximately in UTM Zone 51S (approx.).
How can I reach and visit this point?
Use the satellite imagery above to see the surrounding area. You can open this location directly in Google Maps, Google Earth, Bing Maps, or OpenStreetMap using the buttons provided. Many geodetic points are accessible to the public; some are on protected or private land — check local regulations before any field visit. Always bring documentation or your credentials if you plan to use the marker for professional measurement.
Is this point verified and usable for professional surveying?
This record has been community-verified 0 times. Data quality depends on the source: NGS and official national agency points are typically centimetre-accurate, OpenStreetMap survey points are metre-accurate, and GeoNames topographic landmarks (peaks, hills) are reference-grade only. Always cross-reference with the original agency datasheet before using this point for cadastral, legal, or safety-critical work.